Painting exterior walls can result in the best outcomes when the right steps are followed. Individuals who love to maintain their house and do the job by themselves will surely enjoy painting exterior walls. They will experience a great day scraping, sanding and preparing the walls before they will climb ladders and mix paint. Here is the step by step process in painting exterior walls.

Scrape the Walls

The exterior walls where you can find chipping old paint ought to be scraped in order that the peeling paint will undoubtedly be removed. Seal the crevices and cracks with spackling compound or painter’s caulk. Then, sand the walls using 100-grit sandpaper until you will be able to achieve smoothness on the wood.

Use Mild Soap and Water to clean the House

You can make usage of a pressure sprayer in washing the home; however, you have to be sure that you don’t dig grooves into your wood. Rinse off the soap and allow the wood to dry totally.

Apply Primer Coats

You can apply as many primer coasts as you necessary using a wide brush. You must follow the instructions given by the manufacturer.

Apply the Pain

In applying the paint, you have to start from the most notable down starting at your fascia boards and eaves. 屋根塗装工事 and eaves perimeter should be painted before you start on your walls.

Start the Wall Painting

Start out with a wall area from the top with the application of long horizontal strokes together with your brush. Begin in an area which doesn’t have paint onto it and apply the paint toward the region which you painted. This process should be repeated and soon you have applied the first coat. Always follow the instructions of the manufacturer on the next coats.

In painting exterior walls, it is necessary to wear safety glasses all the time. You can even wear something to protect your lungs once you sand the walls. Allow spackling compound or painter’s caulk dry totally before you begin sanding. This will ensure that there will be a great covering around your trim. Once you have poured paint right into a bucket, make sure that the paint’s lid could be sealed tightly. You can drive a 6d finish nail and make holes round the paint’s rim will assure proper seating of the lid that will preserve your paint in the end. Finally, it isn’t smart to stroke until your brush will be out of paint because this may result in uneven coats.